

Model: YC4108
Part Number: D0300-1003001B
Brands: Yuchai
Engine Model: YC4108
Engine Type: Diesel
Scope of application: light and medium trucks, agricultural machinery, generator sets, marine auxiliary
Yuchai used more than one gasket kit specification on the YC4108 depending on production period and head casting. Kit D0300-1003001B is one of those specifications, distinct from D30-9000100, and the correct choice depends on what is actually fitted to the engine rather than on the model name alone. A kit that looks right on the shelf can be wrong at the head face, and the leak that follows is blamed on the gasket rather than on the specification.
We ask for the engine serial number, the old gasket number and, where possible, a photograph of the head face before a kit is shipped. That information resolves the question in minutes and avoids a return from an overseas port.
This is a complete sealing set for a YC4108 rebuild, not a partial collection of the most common gaskets. Every joint that has to be opened during an overhaul is covered.
Kits are packed flat in a rigid carton so the head gasket cannot be creased in transit.
Compare the old head gasket with the new one before the engine is stripped. Fire ring position, coolant hole pattern and overall thickness are the three features that decide compatibility, and all three are visible when the two gaskets are laid side by side on a flat surface. If any of them differ, stop and check the head casting number before continuing.
Confirm which gasket has failed before ordering. Oil at the pan rail points to the pan gasket or rear main. Coolant at the front of the engine points to the water pump or its housing seal. Soot around the manifold joints with a whistle under load points to manifold gaskets, while bubbles in the radiator point to the head gasket.
The head gasket sees combustion pressure, coolant at temperature and returning oil at the same time, which no other gasket in the engine has to manage. When the engine overheats, the head expands unevenly and the clamping load shifts away from one area of the gasket. The leak that follows begins as a small coolant loss and becomes a compression leak within a few hundred hours of running.
Agricultural engines work in dust and heat, and both shorten gasket life. Dust blocks the radiator core and raises operating temperature, while constant heat cycling works the head gasket harder than steady highway running. Cleaning the radiator and keeping the cooling system at the correct mixture are as important as gasket quality, and they cost nothing.
Reusing the pan gasket after inspecting the bearings, adding sealant to a head gasket and fitting manifold gaskets dry when the manual calls for a thin film are the three most common errors. Each produces a leak that appears only when the engine is hot and working, when the repair costs several times the price of the parts.
Store the kit flat, dry and out of sunlight. Composite gaskets absorb moisture slowly, and a kit stored in a damp workshop should be inspected before fitting. Keep the head gasket in its carton rather than on a bench where it can be bent.
Kits are light and compact, which makes them ideal to consolidate with liners or pistons. Tell us what else is going into the shipment and we will pack the kit on top so it is not crushed by a cylinder block.
Yes. This is a full set, not a partial kit.
Compare the old head gasket and the head casting number, or send us photos.
No. The gasket is installed dry.
No. Gaskets and copper washers are single-use.
Browse the Yuchai gasket set category, and pair the kit with the YC4108 full gasket kit D30-9000100 or the YC4108 cylinder head D0300-1003000.
Yuchai YC4108 Full Gasket Kit (1003001). This set covers the sealing surfaces disturbed during a rebuild. Its head gasket is matched to the head casting, and the small seals it includes are the ones most often forgotten.
Confirm the kit matches the head casting revision, not only the engine model. Castings changed across production and the gasket followed.
Numbers beginning 1003 belong to the numeric series used across WP7, WP8 and WP9. The engine plate is the fastest way to confirm which revision applies. On this engine, confirm the YC4108 application against the engine plate before ordering.
Install the head gasket dry unless the manual says otherwise. Sealant prevents composite and MLS gaskets from seating correctly.
Ordering note. Mixed pallets are accepted, so a single order can carry the block, the gasket set and the small seals together instead of arriving in three shipments.
Related reading: Head Gasket Failure Symptoms and How to Choose a Replacement
| We Are 30 Years Diesel Engine Parts Supplier | |
| Brand | EPID |
| Warranty | 12 Months |
| Condition | 100%New |
| More Models | Weichai: YC4108, and other Weichai series. |
| Shipping | By sea / air / express (DHL, FEDEX, TNT, UPS, EMS) |
| Packing | Standard exporting packing or as required |
| Payment Term | L/C, T/T, Western Union, Trade Assurance |
| Delivery Time | 3-7 days (depend on order) |
| Selling Point | 1. On-time Delivery 2. Genuine Quality Assurance 3. Professional Supplier |
Compare the old head gasket with the new one before the engine is stripped. Fire ring position, coolant hole pattern and overall thickness are the three features that decide compatibility, and all three are visible when the two gaskets are laid side by side on a flat surface. If any of them differ, stop and check the head casting number before continuing.
Confirm which gasket has failed before ordering. Oil at the pan rail points to the pan gasket or rear main. Coolant at the front of the engine points to the water pump or its housing seal. Soot around the manifold joints with a whistle under load points to manifold gaskets, while bubbles in the radiator point to the head gasket.
The head gasket sees combustion pressure, coolant at temperature and returning oil at the same time, which no other gasket in the engine has to manage. When the engine overheats, the head expands unevenly and the clamping load shifts away from one area of the gasket. The leak that follows begins as a small coolant loss and becomes a compression leak within a few hundred hours of running.
Agricultural engines work in dust and heat, and both shorten gasket life. Dust blocks the radiator core and raises operating temperature, while constant heat cycling works the head gasket harder than steady highway running. Cleaning the radiator and keeping the cooling system at the correct mixture are as important as gasket quality, and they cost nothing.
Reusing the pan gasket after inspecting the bearings, adding sealant to a head gasket and fitting manifold gaskets dry when the manual calls for a thin film are the three most common errors. Each produces a leak that appears only when the engine is hot and working, when the repair costs several times the price of the parts.
Store the kit flat, dry and out of sunlight. Composite gaskets absorb moisture slowly, and a kit stored in a damp workshop should be inspected before fitting. Keep the head gasket in its carton rather than on a bench where it can be bent.
Kits are light and compact, which makes them ideal to consolidate with liners or pistons. Tell us what else is going into the shipment and we will pack the kit on top so it is not crushed by a cylinder block.
Browse the Yuchai gasket set category, and pair the kit with the YC4108 full gasket kit D30-9000100 or the YC4108 cylinder head D0300-1003000.


Yes. This is a full set, not a partial kit.
Compare the old head gasket and the head casting number, or send us photos.
No. The gasket is installed dry.
No. Gaskets and copper washers are single-use.
EPID supplies diesel engine parts for Weichai, Baudouin, Yuchai, Caterpillar, Sinotruk, FAW Xichai and Cummins engines. Every order is checked against the original part number before packing, and our team can identify a part from a photo of the engine plate. Ask for a quotation with your model and quantity and we will reply within one working day.