

Model: WP7 / WP8
Part Number: 1003125851
Brands: Weichai Power
Engine Model: WP7, WP7H, WP8, WP8H
Engine Type: Diesel
Scope of application: medium and heavy trucks, buses, construction machinery, generator sets
Several cylinder head castings were used across the production life of the WP7 and WP8, and 1003125851 is one of them. Injector bore depth, port shape and coolant passage layout changed between generations, so a head from the wrong casting fits the block and changes combustion. The resulting symptoms look like a fuel problem, which is why so many of these engines are diagnosed in the wrong direction.
Confirm the engine plate, the old casting number and the injector type before ordering. Photographs of the old head and the nameplate let our team confirm the variant before the consignment ships, which is much cheaper than returning a head from an overseas port.
Each head is cast in high-grade iron, stress relieved and machined on the deck, valve seats, guides and injector bores. The checks that decide whether it will hold are all dimensional, and the measurements can be supplied with the shipment on request.
Head failures usually begin with cooling. A restricted radiator or a tired water pump raises metal temperature, the deck warps and the gasket loses its grip. The early symptoms are easily mistaken for injector problems and are often chased for weeks before the head is suspected.
Preparation decides the outcome. Clean the block deck to bare metal, check flatness with a straight edge and feeler gauge, and confirm that the head bolts are new before starting. A gasket cannot compensate for a deck that is out of specification.
Worn guides let oil down the stems, producing blue smoke at start-up that clears once the engine works. That pattern is often mistaken for worn rings, and the rebuild then goes in the wrong direction. Measuring guide clearance on the bench takes minutes and settles the question before parts are ordered.
Light seat wear can be re-cut and a mildly warped deck machined once if enough material remains. Cracks between seats, at the injector bore or across the deck are not economically repairable, and a repaired head that fails again usually takes the gasket with it.
If the head is being replaced because of valve damage, renew valves, springs and retainers as a set. Reusing springs that have lost tension with new valves produces a valve train that floats at high speed, which shows as a misfire under load rather than at idle.
Keep coolant at the correct concentration, clean the radiator core in dusty conditions and replace the thermostat on schedule. On construction and agricultural engines the core is often packed with dust, which raises temperature without any component fault at all.
Head bolts are torque-to-yield and must be replaced every time the head is removed. Reusing them reduces clamping force, and the gasket then leaks at high load. Order a new bolt set with every head rather than discovering the need halfway through assembly.
Match the engine plate, the old casting number and the injector type. Send photographs of the old head and the nameplate and our team will confirm the variant before shipping, so that the head that arrives is the one the engine needs.
Yes, unless a bare head is requested.
No. They must be replaced every time.
A pressure test and a combustion gas test confirm it.
No. Confirm the casting number against the engine plate.
Browse the Weichai cylinder head category, and pair the head with the WP7 and WP8 cylinder head 1001396787 or the WP7 and WP8 full gasket kit 1001514985.
Weichai WP7 Cylinder Head (1003125851). Every combustion event loads this casting. The fire ring seals against it, the injectors seat in it and the valves operate inside it, so wear or distortion here shows up as smoke, misfire or coolant loss.
Confirm the injector bore depth matches the injectors in use. Shimming an injector to compensate for a different bore is a common shortcut that produces smoke and hard starting.
Numbers beginning 1003 belong to the numeric series used across WP7, WP8 and WP9. The engine plate is the fastest way to confirm which revision applies. On this engine, confirm the WP7 application against the engine plate before ordering.
Fit new head bolts every time. They are torque-to-yield fasteners and reusing them reduces clamping load exactly where the gasket needs it most, under load at working temperature.
Ordering note. Inspection reports can be provided for castings and crankshafts on request, covering the measurements taken before packing.
Related reading: Cylinder Head Rebuild: Valves, Guides and Seats
| We Are 30 Years Diesel Engine Parts Supplier | |
| Brand | EPID |
| Warranty | 12 Months |
| Condition | 100%New |
| More Models | Weichai: WP7, WP7H, WP8, WP8H, and other Weichai series. |
| Shipping | By sea / air / express (DHL, FEDEX, TNT, UPS, EMS) |
| Packing | Standard exporting packing or as required |
| Payment Term | L/C, T/T, Western Union, Trade Assurance |
| Delivery Time | 3-7 days (depend on order) |
| Selling Point | 1. On-time Delivery 2. Genuine Quality Assurance 3. Professional Supplier |
Head failures usually begin with cooling. A restricted radiator or a tired water pump raises metal temperature, the deck warps and the gasket loses its grip. The early symptoms are easily mistaken for injector problems and are often chased for weeks before the head is suspected.
Preparation decides the outcome. Clean the block deck to bare metal, check flatness with a straight edge and feeler gauge, and confirm that the head bolts are new before starting. A gasket cannot compensate for a deck that is out of specification.
Worn guides let oil down the stems, producing blue smoke at start-up that clears once the engine works. That pattern is often mistaken for worn rings, and the rebuild then goes in the wrong direction. Measuring guide clearance on the bench takes minutes and settles the question before parts are ordered.
Light seat wear can be re-cut and a mildly warped deck machined once if enough material remains. Cracks between seats, at the injector bore or across the deck are not economically repairable, and a repaired head that fails again usually takes the gasket with it.
If the head is being replaced because of valve damage, renew valves, springs and retainers as a set. Reusing springs that have lost tension with new valves produces a valve train that floats at high speed, which shows as a misfire under load rather than at idle.
Keep coolant at the correct concentration, clean the radiator core in dusty conditions and replace the thermostat on schedule. On construction and agricultural engines the core is often packed with dust, which raises temperature without any component fault at all.
Head bolts are torque-to-yield and must be replaced every time the head is removed. Reusing them reduces clamping force, and the gasket then leaks at high load. Order a new bolt set with every head rather than discovering the need halfway through assembly.
Match the engine plate, the old casting number and the injector type. Send photographs of the old head and the nameplate and our team will confirm the variant before shipping, so that the head that arrives is the one the engine needs.
Browse the Weichai cylinder head category, and pair the head with the WP7 and WP8 cylinder head 1001396787 or the WP7 and WP8 full gasket kit 1001514985.


Yes, unless a bare head is requested.
No. They must be replaced every time.
A pressure test and a combustion gas test confirm it.
No. Confirm the casting number against the engine plate.
EPID supplies diesel engine parts for Weichai, Baudouin, Yuchai, Caterpillar, Sinotruk, FAW Xichai and Cummins engines. Every order is checked against the original part number before packing, and our team can identify a part from a photo of the engine plate. Ask for a quotation with your model and quantity and we will reply within one working day.