

Model: WP13
Part Number: 1005000997
Brands: Weichai Power
Engine Model: WP13, WP13.480, WP13.500, WP13.550, WP13.580
Engine Type: Diesel
Scope of application: heavy haulage trucks, mining dump trucks, construction machinery, generator sets
The WP13 full gasket kits differ mainly in the head gasket, and 1005000997 is one of several numbers in that family. Each specification matches a particular head casting, so the deciding factor is what is fitted to the engine rather than what the model name says. Compare the old head gasket with the new one before the engine is stripped.
This is a complete sealing set covering every joint opened during an overhaul. Buying the set rather than individual gaskets guarantees that no washer is forgotten, and one missing part produces a leak that appears only under load.
Fire ring position, coolant hole pattern and overall thickness are the three features that decide compatibility, and all are visible when the old and new gaskets are side by side. If any differ, check the head casting number before continuing, because a mismatch produces a leak that no amount of retorquing will cure.
Confirm which gasket failed before ordering. Oil at the pan rail points to the pan gasket or rear main, coolant at the front points to the pump, soot around manifold joints points to manifold gaskets, and bubbles in the radiator point to the head gasket.
Preparation decides whether the gasket seals. Clean both surfaces to bare metal, check flatness, and confirm the head bolts are new.
It sees combustion pressure, coolant at temperature and returning oil at once, which no other gasket has to manage. When the engine overheats, the head expands unevenly and the clamping load shifts, starting a leak that grows with every heat cycle.
Reusing the pan gasket, adding sealant to a head gasket and fitting manifold gaskets dry are the most common errors. Each produces a leak that appears only when the engine is hot and working.
Store the kit flat, dry and out of sunlight. Composite gaskets absorb moisture slowly, and a kit stored in a damp workshop should be inspected before fitting.
Kits are light and compact and consolidate well with liners or pistons. Tell us what else is in the shipment so the kit is packed on top.
Retorque manifold bolts and check pan bolts after the first week, keep coolant at the correct mixture and repair any oil leak immediately, because oil soaking into a composite gasket softens it.
The head gasket is matched to the casting, and castings changed over the WP13 production life. That is why the old gasket and the casting number matter more than the service book when a kit is ordered, particularly on engines that have been rebuilt before.
Never open a pressurised cooling system while hot. Release the cap slowly after the engine has cooled, because the coolant is well above boiling point when pressurised.
Follow the factory sequence and use new torque-to-yield bolts. Retorquing a hot engine with stretch bolts can reduce clamping load rather than increase it, which is the opposite of the intended effect.
Order the head bolt set with the gasket kit rather than separately. The bolts are torque-to-yield and single-use, and a kit sitting in the workshop waiting for bolts holds the rebuild just as effectively as a missing gasket.
Check that every bolt is the same length when new, and follow the factory torque sequence rather than a generic pattern. Uneven clamping is the most common cause of a new head gasket failing early.
Yes. This is a full set.
Compare the old head gasket and the head casting number.
No. It is installed dry.
No. Gaskets and copper washers are single-use.
Browse the Weichai gasket set category, and pair the kit with the WP13 full gasket kit 1004220117 or the WP13 cylinder head 612700040030.
Weichai WP13 Full Gasket Kit (1005000997). The gasket set seals combustion, coolant and oil at every joint opened during a top-end repair. The head gasket inside it is the component that decides whether the job holds.
Confirm the kit matches the head casting revision, not only the engine model. Castings changed across production and the gasket followed.
Numbers beginning 1005 appear on WP8 and WP9 assemblies. Because the series was introduced to simplify supersessions, several older numbers map onto it. On this engine, confirm the WP13 application against the engine plate before ordering.
Use new head bolts and torque in three stages, then angle tighten in the factory sequence. Reused bolts reduce clamping load under load.
Ordering note. For fleet customers, a consolidated stock list can be quoted against the engine plates in service, which usually exposes duplicated part numbers across similar units.
Related reading: Head Gasket Failure Symptoms and How to Choose a Replacement
| We Are 30 Years Diesel Engine Parts Supplier | |
| Brand | EPID |
| Warranty | 12 Months |
| Condition | 100%New |
| More Models | Weichai: WP13, WP13.480, WP13.500, WP13.550, WP13.580, and other Weichai series. |
| Shipping | By sea / air / express (DHL, FEDEX, TNT, UPS, EMS) |
| Packing | Standard exporting packing or as required |
| Payment Term | L/C, T/T, Western Union, Trade Assurance |
| Delivery Time | 3-7 days (depend on order) |
| Selling Point | 1. On-time Delivery 2. Genuine Quality Assurance 3. Professional Supplier |
Fire ring position, coolant hole pattern and overall thickness are the three features that decide compatibility, and all are visible when the old and new gaskets are side by side. If any differ, check the head casting number before continuing, because a mismatch produces a leak that no amount of retorquing will cure.
Confirm which gasket failed before ordering. Oil at the pan rail points to the pan gasket or rear main, coolant at the front points to the pump, soot around manifold joints points to manifold gaskets, and bubbles in the radiator point to the head gasket.
Preparation decides whether the gasket seals. Clean both surfaces to bare metal, check flatness, and confirm the head bolts are new.
It sees combustion pressure, coolant at temperature and returning oil at once, which no other gasket has to manage. When the engine overheats, the head expands unevenly and the clamping load shifts, starting a leak that grows with every heat cycle.
Reusing the pan gasket, adding sealant to a head gasket and fitting manifold gaskets dry are the most common errors. Each produces a leak that appears only when the engine is hot and working.
Store the kit flat, dry and out of sunlight. Composite gaskets absorb moisture slowly, and a kit stored in a damp workshop should be inspected before fitting.
Kits are light and compact and consolidate well with liners or pistons. Tell us what else is in the shipment so the kit is packed on top.
Retorque manifold bolts and check pan bolts after the first week, keep coolant at the correct mixture and repair any oil leak immediately, because oil soaking into a composite gasket softens it.
The head gasket is matched to the casting, and castings changed over the WP13 production life. That is why the old gasket and the casting number matter more than the service book when a kit is ordered, particularly on engines that have been rebuilt before.
Never open a pressurised cooling system while hot. Release the cap slowly after the engine has cooled, because the coolant is well above boiling point when pressurised.
Follow the factory sequence and use new torque-to-yield bolts. Retorquing a hot engine with stretch bolts can reduce clamping load rather than increase it, which is the opposite of the intended effect.
Order the head bolt set with the gasket kit rather than separately. The bolts are torque-to-yield and single-use, and a kit sitting in the workshop waiting for bolts holds the rebuild just as effectively as a missing gasket.
Check that every bolt is the same length when new, and follow the factory torque sequence rather than a generic pattern. Uneven clamping is the most common cause of a new head gasket failing early.
Browse the Weichai gasket set category, and pair the kit with the WP13 full gasket kit 1004220117 or the WP13 cylinder head 612700040030.


Yes. This is a full set.
Compare the old head gasket and the head casting number.
No. It is installed dry.
No. Gaskets and copper washers are single-use.
EPID supplies diesel engine parts for Weichai, Baudouin, Yuchai, Caterpillar, Sinotruk, FAW Xichai and Cummins engines. Every order is checked against the original part number before packing, and our team can identify a part from a photo of the engine plate. Ask for a quotation with your model and quantity and we will reply within one working day.