< img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=2042618782839916&ev=PageView&noscript=1" />
Diesel Engines & Parts
Weichai WP7 Cylinder Block 1000267735 Diesel Engine Parts
Weichai WP7 Cylinder Block 1000267735 Diesel Engine Parts

Weichai WP7 Cylinder Block 1000267735 Diesel Engine Parts

Model: WP7

Part Number: 1000267735

Brands: Weichai Power

Engine Model: WP7, WP7H

Engine Type: Diesel

Scope of application: medium and heavy trucks, buses, construction machinery, generator sets

The block as the reference for every dimension

Every dimension in an engine is referenced to the block. It holds the crankshaft in its main saddles, supports the liners, provides the deck for the head and contains the coolant and oil galleries. Part 1000267735 is a WP7 block, and because it sets the geometry it also sets the quality ceiling of a rebuild.

When replacement beats repair

A deck machined more than once may fall below the minimum height, and a crack through a main saddle cannot be welded reliably because welding distorts bore alignment. A pressure test plus a line bore check settles the question in most cases.

  • Cracks between main saddles or into a liner bore
  • Deck below the manufacturer minimum
  • Liner bores eroded by cavitation
  • Cam bores worn oval so the cam binds
  • Main caps that no longer align
  • Water jacket corrosion breaking into a cylinder

What we check

Blocks are stripped, cleaned and measured before being offered, and the measurements can be supplied with the shipment.

  • Deck flatness across both axes.
  • Main bore alignment verified with a line bore gauge.
  • Liner bore condition, including roundness and pitting.
  • Camshaft bore alignment checked for free rotation.
  • Pressure test of water jacket and oil galleries.

Assembly sequence

The order of assembly matters as much as the parts. Clean the galleries first, then fit the main bearings and check clearances before the crank goes in.

  1. Brush every oil gallery and refit all gallery plugs with sealant.
  2. Fit main bearings, check clearances and confirm free rotation.
  3. Set liner protrusion with a dial gauge.
  4. Check camshaft end float after fitting the thrust plate.
  5. Prime the oil system and confirm pressure before the first start.
  6. Retorque the head and check coolant level after the first heat cycle.

Choosing the correct block

Match the casting number, the front cover pattern and the engine mount holes. Send photos of the old block from three angles with the engine plate and our team will confirm the casting before the container is loaded.

Liner bore preparation

The liner seats are sealing surfaces as much as the O-rings are. Scrape the seat and groove to bright metal and inspect for pitting; any residue left behind lifts the liner and changes protrusion, which shows up later as a head gasket failure.

Gallery plugs and oil pressure

Every gallery plug must be refitted with the correct sealant before the crank goes in. A missing plug means no oil pressure at start-up and destroyed bearings within seconds, and the mistake is invisible once the sump is on.

Freight and crating

Blocks are bolted to a timber base, banded and marked with lifting points, with the deck shielded. Tell us whether the block travels with other parts so heavy items can be loaded first.

Protecting the block in service

Coolant quality prevents liner pitting, oil quality prevents bearing wear and healthy engine mounts prevent cracking. Replace a failed damper promptly and keep the radiator clean in dusty operations.

Inspecting a block before you buy it

Look at the deck for corrosion around the fire ring lands and at the liner seats for pitting. Check the main saddles for fretting marks that indicate a loose cap, and inspect the core plugs for rust breakthrough. These visual checks take minutes and reveal most of the problems that make a block unusable.

Ask for the pressure test report and the line bore measurement rather than relying on a visual assessment. A block that passes both is a sound foundation; one that fails either is not worth machining.

What to measure on arrival

Re-check deck flatness and main bore alignment when the block arrives, even if measurements were supplied. Shipping can move a block on its skid, and a fresh measurement is the reference the whole rebuild will be built around. Record the figures in the engine log so the next overhaul has a baseline.

Why WP7 and WP8 blocks are not interchangeable

They share a family resemblance but differ in bore spacing, deck height and mount positions. A block from the other model will not accept the crank, the liners or the accessories, and the difference is not obvious until assembly begins. Always confirm the casting number against the engine plate.

Freight planning for a block

Blocks are shipped on timber bases and consume container volume quickly. Tell us early if the block will travel with other parts so we can load heavy items first and avoid damaging lighter components placed beside them.

FAQ

Does the block include liners?

It is supplied bare by default. Liners can be fitted on request.

Can a cracked saddle be repaired?

Not reliably. Welding distorts alignment.

Is the WP7 block the same as the WP8 block?

No. They are different castings.

What should I check on delivery?

Deck flatness, main bore alignment, liner bore roundness and the pressure test report.

Related parts and categories

Browse the Weichai cylinder block category, and complete the build with the WP8 cylinder block 1001854444 or the WP7 and WP8 crankshaft 1000186869.

Description

Weichai WP7 Cylinder Block (1000267735). Every clearance in the engine is measured from this casting. That is why a replacement block is checked for deck flatness and main bore alignment before it is packed, and again when it arrives on site.

Before ordering, confirm the casting revision against the engine plate and photograph the engine mount pads. Front cover pattern and accessory faces changed between production periods even when the bore spacing did not.

Numbers beginning 1000 come from the newer numeric series used for assemblies and later-production parts. This series replaced several earlier numbers, so a cross-reference check is worthwhile. On this engine, confirm the WP7 application against the engine plate before ordering.

Clean every oil gallery with brushes and confirm flow before assembly. Swarf left in a gallery destroys new bearings within minutes of the first start.

Ordering note. Lead time depends on whether the item is in stock or has to be produced; the position is confirmed before the order is accepted rather than after payment.

Related reading: Cylinder Block: Cracks, Deck Flatness and Line Boring

We Are 30 Years Diesel Engine Parts Supplier
BrandEPID
Warranty12 Months
Condition100%New
More ModelsWeichai: WP7, WP7H, and other Weichai series.
ShippingBy sea / air / express (DHL, FEDEX, TNT, UPS, EMS)
PackingStandard exporting packing or as required
Payment TermL/C, T/T, Western Union, Trade Assurance
Delivery Time3-7 days (depend on order)
Selling Point1. On-time Delivery   2. Genuine Quality Assurance   3. Professional Supplier

What we check

Blocks are stripped, cleaned and measured before being offered, and the measurements can be supplied with the shipment.

  • Deck flatness across both axes.
  • Main bore alignment verified with a line bore gauge.
  • Liner bore condition, including roundness and pitting.
  • Camshaft bore alignment checked for free rotation.
  • Pressure test of water jacket and oil galleries.

Assembly sequence

The order of assembly matters as much as the parts. Clean the galleries first, then fit the main bearings and check clearances before the crank goes in.

  1. Brush every oil gallery and refit all gallery plugs with sealant.
  2. Fit main bearings, check clearances and confirm free rotation.
  3. Set liner protrusion with a dial gauge.
  4. Check camshaft end float after fitting the thrust plate.
  5. Prime the oil system and confirm pressure before the first start.
  6. Retorque the head and check coolant level after the first heat cycle.

Choosing the correct block

Match the casting number, the front cover pattern and the engine mount holes. Send photos of the old block from three angles with the engine plate and our team will confirm the casting before the container is loaded.

Liner bore preparation

The liner seats are sealing surfaces as much as the O-rings are. Scrape the seat and groove to bright metal and inspect for pitting; any residue left behind lifts the liner and changes protrusion, which shows up later as a head gasket failure.

Gallery plugs and oil pressure

Every gallery plug must be refitted with the correct sealant before the crank goes in. A missing plug means no oil pressure at start-up and destroyed bearings within seconds, and the mistake is invisible once the sump is on.

Freight and crating

Blocks are bolted to a timber base, banded and marked with lifting points, with the deck shielded. Tell us whether the block travels with other parts so heavy items can be loaded first.

Protecting the block in service

Coolant quality prevents liner pitting, oil quality prevents bearing wear and healthy engine mounts prevent cracking. Replace a failed damper promptly and keep the radiator clean in dusty operations.

Inspecting a block before you buy it

Look at the deck for corrosion around the fire ring lands and at the liner seats for pitting. Check the main saddles for fretting marks that indicate a loose cap, and inspect the core plugs for rust breakthrough. These visual checks take minutes and reveal most of the problems that make a block unusable.

Ask for the pressure test report and the line bore measurement rather than relying on a visual assessment. A block that passes both is a sound foundation; one that fails either is not worth machining.

What to measure on arrival

Re-check deck flatness and main bore alignment when the block arrives, even if measurements were supplied. Shipping can move a block on its skid, and a fresh measurement is the reference the whole rebuild will be built around. Record the figures in the engine log so the next overhaul has a baseline.

Why WP7 and WP8 blocks are not interchangeable

They share a family resemblance but differ in bore spacing, deck height and mount positions. A block from the other model will not accept the crank, the liners or the accessories, and the difference is not obvious until assembly begins. Always confirm the casting number against the engine plate.

Freight planning for a block

Blocks are shipped on timber bases and consume container volume quickly. Tell us early if the block will travel with other parts so we can load heavy items first and avoid damaging lighter components placed beside them.

Related parts and categories

Browse the Weichai cylinder block category, and complete the build with the WP8 cylinder block 1001854444 or the WP7 and WP8 crankshaft 1000186869.

Detailed picture

Weichai WP7 Cylinder Block 1000267735 Diesel Engine Parts
Weichai WP7 Cylinder Block 1000267735 Diesel Engine Parts

Q&A

  • Does the block include liners?

    It is supplied bare by default. Liners can be fitted on request.

  • Can a cracked saddle be repaired?

    Not reliably. Welding distorts alignment.

  • Is the WP7 block the same as the WP8 block?

    No. They are different castings.

  • What should I check on delivery?

    Deck flatness, main bore alignment, liner bore roundness and the pressure test report.

Why buy from EPID

EPID supplies diesel engine parts for Weichai, Baudouin, Yuchai, Caterpillar, Sinotruk, FAW Xichai and Cummins engines. Every order is checked against the original part number before packing, and our team can identify a part from a photo of the engine plate. Ask for a quotation with your model and quantity and we will reply within one working day.

send message

    • [recaptcha]

    Home Tel Mail Inquiry