< img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=2042618782839916&ev=PageView&noscript=1" />
Diesel Engines & Parts
Weichai WP6 Oil Pump 13039311 Diesel Engine Parts
Weichai WP6 Oil Pump 13039311 Diesel Engine Parts
Weichai WP6 Oil Pump 13039311 Diesel Engine Parts
Weichai WP6 Oil Pump 13039311 Diesel Engine Parts

Weichai WP6 Oil Pump 13039311 Diesel Engine Parts

Model: WP6

Part Number: 13039311

Brands: Weichai Power

Engine Model: WP6, WP6G, WP6H

Engine Type: Diesel

Scope of application: light and medium trucks, buses, agricultural machinery, generator sets

A second oil pump number for the WP6

The Weichai WP6 has been supplied with more than one oil pump number over its production life, and part 13039311 is one of them, distinct from 12159765. The differences are usually in the drive gear and the pick-up arrangement rather than in the pumping principle, but they are enough that the wrong pump will not sit correctly on the engine.

Confirm the engine plate and the old pump number before ordering. Where the engine has been rebuilt with a replacement front cover, the mounting face may have changed too, and that is not visible from the part number alone.

What the pump has to deliver

On a WP6 the pump feeds the main and rod bearings, the camshaft, the valve train and the piston cooling jets. It must deliver enough volume at idle to protect the bearings when hot, and hold pressure at rated speed without exceeding the limit set by its relief valve.

Wear reduces volume before it reduces peak pressure, which is why a tired pump often shows normal pressure at speed and a worrying drop at hot idle. That pattern is easy to dismiss and is exactly when bearing protection matters most.

Bench testing before packing

Every pump is run on a test bench rather than only inspected, because flow cannot be judged by eye. The tests cover the properties that decide whether the pump will protect the engine in service.

  • Flow at rated speed compared with the original curve.
  • Relief valve opening pressure, set and recorded.
  • Gear backlash and end clearance, which decide volumetric efficiency.
  • Leak test on the housing and the pick-up joint.

Symptoms of pump wear

Low oil pressure is the headline symptom, but the detail matters. Pressure that is low only when hot points as much to worn bearings as to a worn pump, while pressure that recovers instantly with engine speed points to the relief valve or pump clearances.

  • Warning light at hot idle, especially after a climb
  • Pressure falling faster than engine speed
  • Filter bypass opening early
  • Metal debris in the filter or on the magnetic plug
  • Worn gear teeth visible with the cover off
  • Oil weeping from the housing joint or pick-up tube

Troubleshooting order

Work through the system in a fixed order so that nothing is missed. Check oil level and condition, replace the filter, inspect the strainer for a blocked mesh, then measure pressure with a mechanical gauge before considering the pump.

Recording cold idle, hot idle and rated speed gives a clear diagnosis and avoids buying parts that are not needed. A blocked strainer, a stuck relief valve and a faulty sender all imitate a worn pump at the gauge.

Fitting and priming

Priming is the step that is most often rushed. A dry pump takes time to draw oil, and the bearings run without protection while it does.

  1. Clean the sump and strainer before fitting the pump.
  2. Inspect the drive gear and its mating gear; replace worn pairs together.
  3. Fit new gaskets and O-rings and torque to specification.
  4. Prime the pump with clean oil and turn the engine by hand until oil reaches the head.
  5. Change oil and filter after the first start.
  6. Verify pressure at idle and at load before the vehicle goes back into service.

Oil flow and piston cooling

On engines fitted with piston cooling jets, the pump supplies those jets as well as the bearings. A pump that holds pressure but has lost volume still allows crown temperatures to climb, and the damage appears as a scored or cracked piston rather than low oil pressure. If pistons have failed without an obvious cause, measure flow before blaming them.

Choosing the correct pump

Match the part number, the engine rating and the drive type. If the engine has been rebuilt with a replacement front cover, check that the mounting face and drive gear match. Send a photo of the old pump beside a ruler and we will confirm the casting before shipping.

Contamination and pump life

Most premature failures come from contaminated oil. Use the specified grade, change it at the severe-duty interval and never run with a leaking injector that thins the oil with diesel. Keep the cooling system healthy as well, because sustained overheating reduces oil film strength at the bearings.

Stock planning

For fleets, keep a spare pump with gaskets and O-rings on the shelf. Failure is rare but sudden, and a spare turns a two-week wait into an afternoon repair. Include a pick-up O-ring, because it is easy to lose and impossible to improvise.

FAQ

Is a gasket included?

Yes, the mounting gasket and O-ring are supplied.

Can low pressure come from something else?

Yes. A blocked strainer, stuck relief valve, worn bearings or a faulty sender all mimic pump failure.

Is the drive gear supplied?

The pump comes with its drive gear fitted and timed as original.

When should the pump be replaced?

At every major overhaul, or whenever the front cover is removed.

Related parts and categories

Browse the Weichai pump category, and pair the pump with the WP6 oil pump 12159765 or the WP6 crankshaft 13031181.

Description

Weichai WP6 Oil Pump (13039311). Lubrication starts here. The gear set, relief valve and drive must all match the housing, and a mismatch shows up as low pressure from the first start.

Ask whether the relief valve is set for your application. The valve is part of the assembly on these units and its setting is not adjustable in service.

Numbers beginning 1303 belong to the WP6 family. WP6 parts are compact but heavily loaded, and the mounting faces differ between production batches. On this engine, confirm the WP6 application against the engine plate before ordering.

Replace the suction-side O-rings and gaskets with the pump. A hardened O-ring at the pick-up joint draws air and reproduces exactly the symptom the new pump was meant to cure.

Ordering note. Inspection reports can be provided for castings and crankshafts on request, covering the measurements taken before packing.

Related reading: Oil Pump Diagnosis: Low Pressure, Wear and Replacement

We Are 30 Years Diesel Engine Parts Supplier
BrandEPID
Warranty12 Months
Condition100%New
More ModelsWeichai: WP6, WP6G, WP6H, and other Weichai series.
ShippingBy sea / air / express (DHL, FEDEX, TNT, UPS, EMS)
PackingStandard exporting packing or as required
Payment TermL/C, T/T, Western Union, Trade Assurance
Delivery Time3-7 days (depend on order)
Selling Point1. On-time Delivery   2. Genuine Quality Assurance   3. Professional Supplier

Bench testing before packing

Every pump is run on a test bench rather than only inspected, because flow cannot be judged by eye. The tests cover the properties that decide whether the pump will protect the engine in service.

  • Flow at rated speed compared with the original curve.
  • Relief valve opening pressure, set and recorded.
  • Gear backlash and end clearance, which decide volumetric efficiency.
  • Leak test on the housing and the pick-up joint.

Symptoms of pump wear

Low oil pressure is the headline symptom, but the detail matters. Pressure that is low only when hot points as much to worn bearings as to a worn pump, while pressure that recovers instantly with engine speed points to the relief valve or pump clearances.

  • Warning light at hot idle, especially after a climb
  • Pressure falling faster than engine speed
  • Filter bypass opening early
  • Metal debris in the filter or on the magnetic plug
  • Worn gear teeth visible with the cover off
  • Oil weeping from the housing joint or pick-up tube

Troubleshooting order

Work through the system in a fixed order so that nothing is missed. Check oil level and condition, replace the filter, inspect the strainer for a blocked mesh, then measure pressure with a mechanical gauge before considering the pump.

Recording cold idle, hot idle and rated speed gives a clear diagnosis and avoids buying parts that are not needed. A blocked strainer, a stuck relief valve and a faulty sender all imitate a worn pump at the gauge.

Fitting and priming

Priming is the step that is most often rushed. A dry pump takes time to draw oil, and the bearings run without protection while it does.

  1. Clean the sump and strainer before fitting the pump.
  2. Inspect the drive gear and its mating gear; replace worn pairs together.
  3. Fit new gaskets and O-rings and torque to specification.
  4. Prime the pump with clean oil and turn the engine by hand until oil reaches the head.
  5. Change oil and filter after the first start.
  6. Verify pressure at idle and at load before the vehicle goes back into service.

Oil flow and piston cooling

On engines fitted with piston cooling jets, the pump supplies those jets as well as the bearings. A pump that holds pressure but has lost volume still allows crown temperatures to climb, and the damage appears as a scored or cracked piston rather than low oil pressure. If pistons have failed without an obvious cause, measure flow before blaming them.

Choosing the correct pump

Match the part number, the engine rating and the drive type. If the engine has been rebuilt with a replacement front cover, check that the mounting face and drive gear match. Send a photo of the old pump beside a ruler and we will confirm the casting before shipping.

Contamination and pump life

Most premature failures come from contaminated oil. Use the specified grade, change it at the severe-duty interval and never run with a leaking injector that thins the oil with diesel. Keep the cooling system healthy as well, because sustained overheating reduces oil film strength at the bearings.

Stock planning

For fleets, keep a spare pump with gaskets and O-rings on the shelf. Failure is rare but sudden, and a spare turns a two-week wait into an afternoon repair. Include a pick-up O-ring, because it is easy to lose and impossible to improvise.

Related parts and categories

Browse the Weichai pump category, and pair the pump with the WP6 oil pump 12159765 or the WP6 crankshaft 13031181.

Detailed picture

Weichai WP6 Oil Pump 13039311 Diesel Engine Parts
Weichai WP6 Oil Pump 13039311 Diesel Engine Parts
Weichai WP6 Oil Pump 13039311 Diesel Engine Parts
Weichai WP6 Oil Pump 13039311 Diesel Engine Parts

Q&A

  • Is a gasket included?

    Yes, the mounting gasket and O-ring are supplied.

  • Can low pressure come from something else?

    Yes. A blocked strainer, stuck relief valve, worn bearings or a faulty sender all mimic pump failure.

  • Is the drive gear supplied?

    The pump comes with its drive gear fitted and timed as original.

  • When should the pump be replaced?

    At every major overhaul, or whenever the front cover is removed.

Why buy from EPID

EPID supplies diesel engine parts for Weichai, Baudouin, Yuchai, Caterpillar, Sinotruk, FAW Xichai and Cummins engines. Every order is checked against the original part number before packing, and our team can identify a part from a photo of the engine plate. Ask for a quotation with your model and quantity and we will reply within one working day.

send message

    • [recaptcha]

    Home Tel Mail Inquiry