< img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=2042618782839916&ev=PageView&noscript=1" />
Diesel Engines & Parts
Weichai WP6 Full Gasket Kit 13059912 Engine Overhaul Set
Weichai WP6 Full Gasket Kit 13059912 Engine Overhaul Set
Weichai WP6 Full Gasket Kit 13059912 Engine Overhaul Set

Weichai WP6 Full Gasket Kit 13059912 Engine Overhaul Set

Model: WP6

Part Number: 13059912

Brands: Weichai Power

Engine Model: WP6, WP6G, WP6H

Engine Type: Diesel

Scope of application: light and medium trucks, buses, agricultural machinery, generator sets

Another gasket kit number for the WP6

The WP6 has been supplied with more than one full gasket kit number, and part 13059912 is one of them alongside 13026701. The differences are usually concentrated in the head gasket, tied to a production change in the cylinder head casting, while the pan and manifold gaskets remain largely common.

That is why we ask for the old head gasket and the casting number before shipping. A kit that fits the bolt pattern can still be wrong at the fire ring, and the leak that follows is blamed on the gasket rather than on the specification.

What the kit contains

This is a complete sealing set for a rebuild, covering every joint that is opened during an overhaul. Buying the set instead of individual gaskets guarantees that no washer is forgotten, which matters because one missing part produces a leak that appears only when the engine is hot and working.

  • Head gasket matched to the head casting.
  • Valve cover and manifold gaskets.
  • Oil pan gasket and timing cover seals.
  • Front and rear crank seals.
  • Water pump and thermostat housing seals.
  • Injector copper washers and small O-rings.

How to identify which kit you need

Compare the old head gasket with the new one before the engine is stripped. Fire ring position, coolant hole pattern and thickness decide compatibility, and all three are visible when the two gaskets are laid side by side on a flat surface. If they differ, stop and check the casting number.

Symptoms of a failed gasket set

Confirm which gasket has failed before ordering. Oil at the pan rail points to the pan gasket or rear main, coolant at the front points to the pump, soot around manifold joints points to manifold gaskets, and bubbles in the radiator point to the head gasket.

  • Oil weeping from the pan rail or rear main
  • Coolant seeping at the pump or thermostat housing
  • Soot marks around manifold joints
  • Bubbles in the radiator
  • Oil and coolant mixing
  • Compression loss between adjacent cylinders

Installation sequence

Preparation decides whether the gasket seals. Clean both surfaces to bare metal, check flatness, and confirm the head bolts are new before the head goes back on.

  1. Clean every mating surface to bare metal.
  2. Check head and block deck flatness.
  3. Fit the head gasket dry, without sealant.
  4. Use new head bolts and torque in the factory sequence.
  5. Apply anaerobic sealant only where specified.
  6. Recheck for leaks after the first heat cycle.

Why the head gasket fails first

The head gasket sees combustion pressure, coolant at temperature and returning oil at once, which no other gasket in the engine has to manage. When the engine overheats, the head expands unevenly and the clamping load shifts away from one area of the gasket, starting a leak that grows with every heat cycle.

Common fitting mistakes

Reusing the pan gasket after inspecting the bearings, adding sealant to a head gasket and fitting manifold gaskets dry are the most common errors. Each produces a leak that appears only when the engine is hot and working, when the repair costs far more than the parts.

Storage and handling

Store the kit flat, dry and out of sunlight. Composite gaskets absorb moisture slowly, and a kit stored in a damp workshop should be inspected before fitting. Keep the head gasket in its carton rather than on a bench where it can be bent.

Freight and consolidation

Kits are light and compact, ideal to consolidate with liners or pistons. Tell us what else is in the shipment so the kit is packed on top and not crushed by a cylinder block.

After the rebuild

Retorque manifold bolts and check pan bolts after the first week. Keep coolant at the correct mixture to prevent liner pitting and repair any oil leak immediately, because oil soaking into a composite gasket eventually softens it.

Manifold gaskets and exhaust leaks

Manifold gaskets fail differently from head gaskets: rather than consuming coolant, they leave soot tracks and a whistle under load. Check the manifold face for warping when the gasket is replaced, because a manifold that has been hot can bow and a new gasket on a bowed face leaks again within weeks.

FAQ

Is the head gasket included?

Yes. This is a full set.

How do I choose between the WP6 kits?

Compare the old head gasket and the head casting number, or send us photos.

Do I need sealant with the head gasket?

No. It is installed dry.

Are the gaskets reusable?

No. Gaskets and copper washers are single-use.

Related parts and categories

Browse the Weichai gasket set category, and pair the kit with the WP6 full gasket kit 13026701 or the WP6 cylinder head 13028588.

Description

Weichai WP6 Full Gasket Kit (13059912). Sealing is the difference between a rebuild that finishes in one pass and one that waits a week for a missing washer. This set covers the head, manifolds, injectors and the small seals.

Compare the old head gasket with the new one for fire ring position, coolant hole pattern and thickness. A gasket from the wrong generation bolts up and leaks at the fire ring.

Numbers beginning 1305 belong to the WP6 generation, where the same nominal component was produced with more than one flange pattern. On this engine, confirm the WP6 application against the engine plate before ordering.

Install the head gasket dry unless the manual says otherwise. Sealant prevents composite and MLS gaskets from seating correctly.

Ordering note. For fleet customers, a consolidated stock list can be quoted against the engine plates in service, which usually exposes duplicated part numbers across similar units.

Related reading: Head Gasket Failure Symptoms and How to Choose a Replacement

We Are 30 Years Diesel Engine Parts Supplier
BrandEPID
Warranty12 Months
Condition100%New
More ModelsWeichai: WP6, WP6G, WP6H, and other Weichai series.
ShippingBy sea / air / express (DHL, FEDEX, TNT, UPS, EMS)
PackingStandard exporting packing or as required
Payment TermL/C, T/T, Western Union, Trade Assurance
Delivery Time3-7 days (depend on order)
Selling Point1. On-time Delivery   2. Genuine Quality Assurance   3. Professional Supplier

How to identify which kit you need

Compare the old head gasket with the new one before the engine is stripped. Fire ring position, coolant hole pattern and thickness decide compatibility, and all three are visible when the two gaskets are laid side by side on a flat surface. If they differ, stop and check the casting number.

Symptoms of a failed gasket set

Confirm which gasket has failed before ordering. Oil at the pan rail points to the pan gasket or rear main, coolant at the front points to the pump, soot around manifold joints points to manifold gaskets, and bubbles in the radiator point to the head gasket.

  • Oil weeping from the pan rail or rear main
  • Coolant seeping at the pump or thermostat housing
  • Soot marks around manifold joints
  • Bubbles in the radiator
  • Oil and coolant mixing
  • Compression loss between adjacent cylinders

Installation sequence

Preparation decides whether the gasket seals. Clean both surfaces to bare metal, check flatness, and confirm the head bolts are new before the head goes back on.

  1. Clean every mating surface to bare metal.
  2. Check head and block deck flatness.
  3. Fit the head gasket dry, without sealant.
  4. Use new head bolts and torque in the factory sequence.
  5. Apply anaerobic sealant only where specified.
  6. Recheck for leaks after the first heat cycle.

Why the head gasket fails first

The head gasket sees combustion pressure, coolant at temperature and returning oil at once, which no other gasket in the engine has to manage. When the engine overheats, the head expands unevenly and the clamping load shifts away from one area of the gasket, starting a leak that grows with every heat cycle.

Common fitting mistakes

Reusing the pan gasket after inspecting the bearings, adding sealant to a head gasket and fitting manifold gaskets dry are the most common errors. Each produces a leak that appears only when the engine is hot and working, when the repair costs far more than the parts.

Storage and handling

Store the kit flat, dry and out of sunlight. Composite gaskets absorb moisture slowly, and a kit stored in a damp workshop should be inspected before fitting. Keep the head gasket in its carton rather than on a bench where it can be bent.

Freight and consolidation

Kits are light and compact, ideal to consolidate with liners or pistons. Tell us what else is in the shipment so the kit is packed on top and not crushed by a cylinder block.

After the rebuild

Retorque manifold bolts and check pan bolts after the first week. Keep coolant at the correct mixture to prevent liner pitting and repair any oil leak immediately, because oil soaking into a composite gasket eventually softens it.

Manifold gaskets and exhaust leaks

Manifold gaskets fail differently from head gaskets: rather than consuming coolant, they leave soot tracks and a whistle under load. Check the manifold face for warping when the gasket is replaced, because a manifold that has been hot can bow and a new gasket on a bowed face leaks again within weeks.

Related parts and categories

Browse the Weichai gasket set category, and pair the kit with the WP6 full gasket kit 13026701 or the WP6 cylinder head 13028588.

Detailed picture

Weichai WP6 Full Gasket Kit 13059912 Engine Overhaul Set
Weichai WP6 Full Gasket Kit 13059912 Engine Overhaul Set
Weichai WP6 Full Gasket Kit 13059912 Engine Overhaul Set

Q&A

  • Is the head gasket included?

    Yes. This is a full set.

  • How do I choose between the WP6 kits?

    Compare the old head gasket and the head casting number, or send us photos.

  • Do I need sealant with the head gasket?

    No. It is installed dry.

  • Are the gaskets reusable?

    No. Gaskets and copper washers are single-use.

Why buy from EPID

EPID supplies diesel engine parts for Weichai, Baudouin, Yuchai, Caterpillar, Sinotruk, FAW Xichai and Cummins engines. Every order is checked against the original part number before packing, and our team can identify a part from a photo of the engine plate. Ask for a quotation with your model and quantity and we will reply within one working day.

send message

    • [recaptcha]

    Home Tel Mail Inquiry