

Model: WD615 / WP10
Part Number: 1006466588
Brands: Weichai Power
Engine Model: WD615, WD615E2, WD10, WP10, WP10G
Engine Type: Diesel
Scope of application: heavy trucks, buses, construction machinery, generator sets
The WD615 and WP10 engines carry several crankshaft numbers, and 1006466588 is one of them alongside 612600020751, 1000072536 and others. The differences are usually in the damper fixing or the flywheel flange, tied to a production revision rather than to the journal dimensions. A shaft from the wrong variant fits the block but will not accept your existing damper or flywheel.
Six-cylinder engines that work at high load put heavy bending loads and torsional pulses through the crankshaft. The shaft carries the main and rod bearings, drives the oil pump and camshaft through the gear train and delivers torque to the flywheel. Once a journal loses roundness the bearing cannot maintain an oil film, pressure falls and failure follows quickly.
Bearing noise and oil pressure are the indicators that matter, and the knock appears later than the pressure change does. By the time the knock is audible the journal is already damaged and the bearing is close to spinning.
Measure before assembly, record the figures and confirm main bore alignment. A distorted tunnel wears new bearings within hours, and the shaft is usually blamed for a block problem.
Match the part number, the journal size and the shells you intend to fit. Photographs of both shaft ends resolve the variant question faster than any catalogue, because the damper fixing and flange pattern are visible there. Send the bearing part numbers as well and we will confirm the journal size before shipping.
A six-cylinder crankshaft twists and untwists several times per revolution. The damper absorbs that oscillation; when its rubber perishes, the oscillation reaches the shaft and cracks begin at the fillets. Inspect the damper whenever the shaft is out, and replace it with a new shaft as a matter of course.
The rear main bearing receives oil through a gallery that crosses the block. If that gallery is left partially blocked after cleaning, the rear bearing runs dry first and the shaft shows heat marks exactly there. The rear seal also runs on the shaft flange, so a scored surface will leak even with a new seal.
Shafts are bolted into braced crates with journals sleeved and lifting points marked. Freight is charged on weight and volume, so tell us whether the shaft travels with a block so we can plan the load.
Lubrication and vibration control decide crankshaft life. Use the specified oil, change it at the severe-duty interval, keep the cooler clean and never run with a leaking injector that dilutes the oil.
Shells come in standard and undersize grades and the grade must match the journal after any regrind. Check clearance with plastigauge at every journal and record the figures, because one undersize journal among seven is easy to miss and destroys the shaft within a few thousand kilometres.
A shaft can be perfect and still fail within hours if the block tunnel is out of line. Measure with a line bore gauge or have the block checked before the crank goes in, because a distorted tunnel loads the bearings unevenly and the shaft is usually blamed afterwards.
The flywheel flange carries the full engine torque into the gearbox. Inspect the flange face and the pilot bore when the shaft arrives, because a corroded face causes clutch or converter problems that look unrelated to the crankshaft.
Compare the damper fixing and flywheel flange, or send us photos.
Yes, journals and fillets are nitrided.
Only if enough hardened layer remains.
Strongly recommended with a new shaft.
Explore the Weichai crankshaft category, and complete the bottom end with the WD615 crankshaft 612600020751 or the WD615 cylinder block 1002099589.
Weichai WD615 Crankshaft (1006466588). This shaft carries every firing impulse in the engine through six throws, and the journals are what maintain the oil film under that load. Ovality matters more here than nominal diameter.
Measure ovality at several positions along each journal, not at one point. A journal can read the correct diameter and still be oval by a few hundredths, which collapses the oil film twice per revolution.
Numbers beginning 1006 belong to the numeric series used on WP12 and WD618 later production. Cross-referencing against the old part number is recommended. On this engine, confirm the WD615 application against the engine plate before ordering.
Ask the machine shop explicitly whether the fillet radius has been restored, and to what value. Fatigue cracks start at the journal-to-web transition, and a sharp corner from grinding is where they begin.
Ordering note. For fleet customers, a consolidated stock list can be quoted against the engine plates in service, which usually exposes duplicated part numbers across similar units.
Related reading: Crankshaft Inspection: Journals, Fillets and Regrinding
| We Are 30 Years Diesel Engine Parts Supplier | |
| Brand | EPID |
| Warranty | 12 Months |
| Condition | 100%New |
| More Models | Weichai: WD615, WD615E2, WD10, WP10, WP10G, and other Weichai series. |
| Shipping | By sea / air / express (DHL, FEDEX, TNT, UPS, EMS) |
| Packing | Standard exporting packing or as required |
| Payment Term | L/C, T/T, Western Union, Trade Assurance |
| Delivery Time | 3-7 days (depend on order) |
| Selling Point | 1. On-time Delivery 2. Genuine Quality Assurance 3. Professional Supplier |
Bearing noise and oil pressure are the indicators that matter, and the knock appears later than the pressure change does. By the time the knock is audible the journal is already damaged and the bearing is close to spinning.
Measure before assembly, record the figures and confirm main bore alignment. A distorted tunnel wears new bearings within hours, and the shaft is usually blamed for a block problem.
Match the part number, the journal size and the shells you intend to fit. Photographs of both shaft ends resolve the variant question faster than any catalogue, because the damper fixing and flange pattern are visible there. Send the bearing part numbers as well and we will confirm the journal size before shipping.
A six-cylinder crankshaft twists and untwists several times per revolution. The damper absorbs that oscillation; when its rubber perishes, the oscillation reaches the shaft and cracks begin at the fillets. Inspect the damper whenever the shaft is out, and replace it with a new shaft as a matter of course.
The rear main bearing receives oil through a gallery that crosses the block. If that gallery is left partially blocked after cleaning, the rear bearing runs dry first and the shaft shows heat marks exactly there. The rear seal also runs on the shaft flange, so a scored surface will leak even with a new seal.
Shafts are bolted into braced crates with journals sleeved and lifting points marked. Freight is charged on weight and volume, so tell us whether the shaft travels with a block so we can plan the load.
Lubrication and vibration control decide crankshaft life. Use the specified oil, change it at the severe-duty interval, keep the cooler clean and never run with a leaking injector that dilutes the oil.
Shells come in standard and undersize grades and the grade must match the journal after any regrind. Check clearance with plastigauge at every journal and record the figures, because one undersize journal among seven is easy to miss and destroys the shaft within a few thousand kilometres.
A shaft can be perfect and still fail within hours if the block tunnel is out of line. Measure with a line bore gauge or have the block checked before the crank goes in, because a distorted tunnel loads the bearings unevenly and the shaft is usually blamed afterwards.
The flywheel flange carries the full engine torque into the gearbox. Inspect the flange face and the pilot bore when the shaft arrives, because a corroded face causes clutch or converter problems that look unrelated to the crankshaft.
Explore the Weichai crankshaft category, and complete the bottom end with the WD615 crankshaft 612600020751 or the WD615 cylinder block 1002099589.


Compare the damper fixing and flywheel flange, or send us photos.
Yes, journals and fillets are nitrided.
Only if enough hardened layer remains.
Strongly recommended with a new shaft.
EPID supplies diesel engine parts for Weichai, Baudouin, Yuchai, Caterpillar, Sinotruk, FAW Xichai and Cummins engines. Every order is checked against the original part number before packing, and our team can identify a part from a photo of the engine plate. Ask for a quotation with your model and quantity and we will reply within one working day.